Part Number: 40509-10K

(No reviews yet) Write a Review
CONDITION:
NS
L-3 COMMUNICATIONS CORPORATION82152
BI TECHNOLOGIES CORPORATION73138
VISHAY THIN FILM, LLC2111
IV-ELECTRONIC KLAUS VESPERMANN KGC7407
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.700 INCHES NOMINAL
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0 TO 100.0 SINGLE SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS0.75 FREE AIR SINGLE SECTION
SECTION QUANTITY1
BODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
RELIABILITY INDICATORNOT ESTABLISHED
TERMINAL LENGTH0.500 INCHES NOMINAL
MOUNTING HOLE DIAMETER0.093 INCHES NOMINAL
SHAFT DIAMETER0.058 INCHES NOMINAL
SHAFT LENGTH0.070 INCHES NOMINAL
BODY LENGTH1.250 INCHES NOMINAL
BODY WIDTH0.190 INCHES NOMINAL
BODY HEIGHT0.315 INCHES NOMINAL
SHAFT STYLEROUND, SLOTTED
ACTUATOR TYPESINGLE SHAFT
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION6120.0 MINIMUM AND 9720.0 MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.900 INCHES NOMINAL
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS1.000 INCHES NOMINAL
MOUNTING FACILITY QUANTITY2
TERMINAL LOCATIONLOWER ADJACENT SIDE SINGLE ROW
MOUNTING METHODTERMINAL AND UNTHREADED HOLE
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG6120.0 MINIMUM AND 9720.0 MAXIMUM
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECLUTCH
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
TEST DATA DOCUMENT81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TERMINAL TYPE AND QUANTITY3 PIN
SPECIFICATION/STANDARD DATA81349-MIL-R-22097/2 GOVERNMENT SPECIFICATION
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.