| RAYTHEON COMPANY | 6845 |
| IMS ENGINEERED PRODUCTS, LLC | 98587 |
| IMS ENGINEERED PRODUCTS, LLC | 98587 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.520 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
| FASTENER LENGTH | 0.620 INCHES NOMINAL |
| HEAD STYLE | HEXAGON EXTENDED WASHER |
| WIDTH BETWEEN FLATS | 0.380 INCHES NOMINAL |
| EXTENDED WASHER DIAMETER | 0.500 INCHES NOMINAL |
| NOMINAL THREAD DIAMETER | 0.250 INCHES |
| FEATURES PROVIDED | FINISHED HEAD |
| THREAD QUANTITY PER INCH | 20 |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| THREAD SERIES DESIGNATOR | UNC |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.520 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
| FASTENER LENGTH | 0.620 INCHES NOMINAL |
| HEAD STYLE | HEXAGON EXTENDED WASHER |
| WIDTH BETWEEN FLATS | 0.380 INCHES NOMINAL |
| EXTENDED WASHER DIAMETER | 0.500 INCHES NOMINAL |
| NOMINAL THREAD DIAMETER | 0.250 INCHES |
| FEATURES PROVIDED | FINISHED HEAD |
| THREAD QUANTITY PER INCH | 20 |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| THREAD SERIES DESIGNATOR | UNC |
| An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of .19 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of . 15 inch ( . 38 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE. |
10133-0701
$0.00