| THOMPSON AEROSPACE, LLC | 2991 |
| VALLEY-TODECO, INC. | 6710 |
| MORTON GRINDING, INC. | 2T498 |
| HOLLYWOOD MANUFACTURING, INC | 7T729 |
| ALCOA GLOBAL FASTENERS, INC. | 92215 |
| GENERAL ELECTRIC COMPANY | 99207 |
| THREAD PITCH DIAMETERS | +0.1644/+0.1667 INCHES NUT THREAD |
| THREAD PITCH DIAMETERS | +0.1644/+0.1667 INCHES STUD THREAD |
| THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| THREAD LENGTH | 0.225 INCHES MINIMUM STUD THREAD AND 0.235 INCHES MAXIMUM STUD THREAD |
| THREAD LENGTH | 0.255 INCHES MINIMUM NUT THREAD AND 0.275 INCHES MAXIMUM NUT THREAD |
| OVERALL LENGTH | 0.890 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 32 NUT THREAD |
| THREAD QUANTITY PER INCH | 32 STUD THREAD |
| NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD |
| NOMINAL THREAD SIZE | 0.190 INCHES STUD THREAD |
| SURFACE FINISH | 32.0 MICROINCHES NUT THD |
| SURFACE FINISH | 32.0 MICROINCHES SHANK |
| SURFACE FINISH | 32.0 MICROINCHES STUD THD |
| SPECIAL FEATURES | HEX SOCKET 0.170 IN. MAX FM NUT END |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | C50TF13 FSCM 99207 MFR REF SINGLE MATERIAL RESPONSE |
| THREAD SERIES DESIGNATOR | UNS NUT THREAD |
| THREAD SERIES DESIGNATOR | UNS STUD THREAD |
| THREAD PITCH DIAMETERS | +0.1644/+0.1667 INCHES NUT THREAD |
| THREAD PITCH DIAMETERS | +0.1644/+0.1667 INCHES STUD THREAD |
| THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| THREAD LENGTH | 0.225 INCHES MINIMUM STUD THREAD AND 0.235 INCHES MAXIMUM STUD THREAD |
| THREAD LENGTH | 0.255 INCHES MINIMUM NUT THREAD AND 0.275 INCHES MAXIMUM NUT THREAD |
| OVERALL LENGTH | 0.890 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 32 NUT THREAD |
| THREAD QUANTITY PER INCH | 32 STUD THREAD |
| NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD |
| NOMINAL THREAD SIZE | 0.190 INCHES STUD THREAD |
| SURFACE FINISH | 32.0 MICROINCHES NUT THD |
| SURFACE FINISH | 32.0 MICROINCHES SHANK |
| SURFACE FINISH | 32.0 MICROINCHES STUD THD |
| SPECIAL FEATURES | HEX SOCKET 0.170 IN. MAX FM NUT END |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | C50TF13 FSCM 99207 MFR REF SINGLE MATERIAL RESPONSE |
| THREAD SERIES DESIGNATOR | UNS NUT THREAD |
| THREAD SERIES DESIGNATOR | UNS STUD THREAD |
| A headless fastener not exceeding 12 inches (3 4.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus . 2 inches ( .5 8 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD. |
