Part Number: 410-4178

(No reviews yet) Write a Review
CONDITION:
NS
NIMIKKEISTOKESKUS NCB FINLANDA486G
THALES ELECTRONIC SYSTEMS GMBH DBA VERTEIDIGUNGSSYSTEME SEL GMBH DIV CUSTOMER SERVICESD8385
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
SECTION QUANTITY1
BODY STYLERECTANGULAR
RELIABILITY INDICATORNOT ESTABLISHED
III OVERALL LENGTH0.300 INCHES NOMINAL
TERMINAL LENGTH0.172 INCHES MINIMUM
III OVERALL HEIGHT0.422 INCHES NOMINAL
III OVERALL WIDTH0.165 INCHES NOMINAL
SHAFT DIAMETER0.075 INCHES NOMINAL
SHAFT LENGTH0.050 INCHES MAXIMUM
BODY LENGTH0.250 INCHES NOMINAL
BODY WIDTH0.165 INCHES NOMINAL
BODY HEIGHT0.250 INCHES NOMINAL
SHAFT STYLEROUND, SLOTTED
ACTUATOR TYPESINGLE SHAFT
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.200 INCHES NOMINAL
TERMINAL LOCATIONLOWER ADJACENT SIDE TWO ROWS
MOUNTING METHODTERMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.100 INCHES NOMINAL
ELECTRICAL RESISTANCE PER SECTION2.0 KILOHMS SINGLE SECTION
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.100 INCHES NOMINAL
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0 TO 100.0 SINGLE SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS0.25 FREE AIR SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
TEST DATA DOCUMENT81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TERMINAL TYPE AND QUANTITY3 PIN
SPECIFICATION/STANDARD DATA81349-MIL-R-22097/5 GOVERNMENT SPECIFICATION
STYLE DESIGNATOR73 FLAT
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.