Part Number: 411-8977

(No reviews yet) Write a Review
CONDITION:
NS
NIMIKKEISTOKESKUS NCB FINLANDA486G
HARRIS CORPORATION24930
SECTION QUANTITY2
BODY STYLECYLINDRICAL BUSHING MOUNTED
RELIABILITY INDICATORNOT ESTABLISHED
OVERALL LENGTH2.164 INCHES NOMINAL
BODY DIAMETER1.125 INCHES NOMINAL
SHAFT DIAMETER0.200 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
SHAFT LENGTH0.797 INCHES MINIMUM AND 0.891 INCHES MAXIMUM
MOUNTING BUSHING LENGTH0.375 INCHES NOMINAL
BODY LENGTH0.945 INCHES NOMINAL
SHAFT STYLEROUND
ACTUATOR TYPEDUAL CONCENTRIC
NONTURN DEVICE LOCATIONAT 9 OCLOCK
NONTURN DEVICE RADIUS0.438 INCHES NOMINAL
SCREW THREAD DIAMETER0.375 INCHES NOMINAL
SCREW THREAD SERIES DESIGNATORUNEF
SCREW THREAD QUANTITY PER INCH32
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
MOUNTING METHODSTANDARD BUSHING
ELECTRICAL RESISTANCE PER SECTION25.0 KILOHMS ALL SECTIONS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 ALL SECTIONS
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR ALL SECTIONS
RESISTANCE TOLERANCE PER SECTION IN PERCENT-20.0/+20.0 ALL SECTIONS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 ALL SECTIONS
TERMINAL TYPE AND QUANTITY6 TAB, SOLDER LUG
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.