PIPER AIRCRAFT INC. | 77294 |
DEFENSE REDUCTION AGENCY | 32345 |
ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
LOCKHEED MARTIN CORPORATION | 98897 |
ALLMETAL SCREW PRODUCTS CORP. | 70318 |
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
CHAMFER LENGTH | 0.062 INCHES MAXIMUM |
DIAMETER | 0.184 INCHES MINIMUM AND 0.186 INCHES MAXIMUM |
UNDER HEAD LENGTH | 0.522 INCHES MINIMUM AND 0.542 INCHES MAXIMUM |
HOLE ARRANGEMENT STYLE | ONE END DRILLED |
FIRST HOLE DIAMETER | 0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.088 INCHES NOMINAL |
HARDNESS RATING | 26.5 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
PIN CHAMFER ANGLE | 14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM |
SHEAR STRENGTH | 4140 DOUBLE POUND |
PIN HEAD DIAMETER | 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
SPECIAL FEATURES | SHANK END MAY HAVE EITHER A CHAMFER OR RADIUS AT THE OPTION OF THE VENDOR |
HEIGHT | 0.030 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
MATERIAL | STEEL COMP 4037 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 8630 OVERALL |
MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
STYLE DESIGNATOR | STRAIGHT |
TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC. |