WASHER,FLAT,
| KALMAR AC INC | 0AHU0 |
| TIFFIN PARTS, L.L.C. | 13841 |
| CNH INDUSTRIAL AMERICA LLC | 10988 |
| LULL LIFT CORP DBA OMNIQUIP PARTS WORLDWIDE | 5331 |
| JLG INDUSTRIES, INC. | 1YHH8 |
| AMBAC INTERNATIONAL CORPORATION | 1843 |
| UNITED TECHNOLOGIES CORP ELECTRO SYSTEMS INC | 24956 |
| ROBERT BOSCH LLC | 53867 |
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| HOLE DIAMETER | 0.235 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| PERIPHERAL SHAPE STYLE | ROUND |
| CENTER HOLE SHAPE STYLE | ROUND |
| THICKNESS | 0.014 INCHES MINIMUM AND 0.016 INCHES MAXIMUM |
| OVERALL DIAMETER | 0.565 INCHES MINIMUM AND 0.570 INCHES MAXIMUM |
| MATERIAL | STEEL OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL OR ZINC OVERALL |
| SPECIFICATION/STANDARD DATA | 96906-MS24587 GOVERNMENT STANDARD |
| A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch ( .8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be . 6 inches ( .15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be . 16 inches ( .4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. |
0