| E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | SCY13 |
| E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | SCY13 |
| ARMY, UNITED STATES DEPARTMENT OF THE | 19204 |
| FIRST END STYLE | CHAMFERED |
| PIN OVERALL LENGTH | 0.980 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| PIN OVERALL DIAMETER | 0.1258 INCHES MINIMUM AND 0.1265 INCHES MAXIMUM |
| FIRST END TAPER LENGTH | 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM OVERALL AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| FIRST END TAPER ANGLE | 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM |
| MATERIAL | STEEL COMP W109 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-T-580 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | ZINC OVERALL AND CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-Z-325,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (3 4 MM); for items whose length exceeds twelve inches (3 4 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED. |
