| AM GENERAL LLC | 34623 |
| I.M.P. GROUP LIMITED | 38665 |
| MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| HEAD STYLE | FLAT |
| HEAD DIAMETER | 0.391 INCHES MINIMUM AND 0.421 INCHES MAXIMUM |
| HEAD HEIGHT | 0.038 INCHES NOMINAL |
| NUT STYLE | BLIND RIVET W/SMOOTH ROUND SHANK |
| NUT DIAMETER | 0.246 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| NUT LENGTH | 0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM |
| UNABLE TO DECODE | +0.080 TO 0.130 INCHES |
| SHANK END TYPE | OPEN |
| III END ITEM IDENTIFICATION | MRAP - COUGAR |
| THREAD SERIES | UNF |
| THREAD QUANTITY PER INCH | 32 |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| MATERIAL | ALUMINUM ALLOY 6053 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SPECIAL FEATURES | W/BODY;W/FILTER MATERIAL,CORRUGATED MONEL TAPE FILTER MATERIAL, NOT REPLACEABLE;CADMIUM-PLATE D FINISH; MTG DATA;NONTHREADED TYPE,0.438 IN.OD MTG,DRILLED HOLE TYPE LOCKING FEATURE |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| HEAD STYLE | FLAT |
| HEAD DIAMETER | 0.391 INCHES MINIMUM AND 0.421 INCHES MAXIMUM |
| HEAD HEIGHT | 0.038 INCHES NOMINAL |
| NUT STYLE | BLIND RIVET W/SMOOTH ROUND SHANK |
| NUT DIAMETER | 0.246 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| NUT LENGTH | 0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM |
| UNABLE TO DECODE | +0.080 TO 0.130 INCHES |
| SHANK END TYPE | OPEN |
| III END ITEM IDENTIFICATION | MRAP - COUGAR |
| THREAD SERIES | UNF |
| THREAD QUANTITY PER INCH | 32 |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| MATERIAL | ALUMINUM ALLOY 6053 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SPECIAL FEATURES | W/BODY;W/FILTER MATERIAL,CORRUGATED MONEL TAPE FILTER MATERIAL, NOT REPLACEABLE;CADMIUM-PLATE D FINISH; MTG DATA;NONTHREADED TYPE,0.438 IN.OD MTG,DRILLED HOLE TYPE LOCKING FEATURE |
| A metallic headed fastener having internal threads for a portion of the full length. It may have a smooth, hexagon or splined shank with an open or closed end. Is designed to be expanded tightly against the material it is being installed in by means of a special tool. The item must have a specified grip range. The grip range is the thickness of the material the item is being installed in. See also NUT (1) SELF-LOCKING, BLIND RIVET. Excludes NUT (1), SLEEVE. |
