SLEEVE,
| OGDEN AIR LOGISTICS CENTER | 98747 |
| OVERALL LENGTH | 0.4650 INCHES MINIMUM AND 0.4750 INCHES MAXIMUM |
| BODY OUTSIDE DIAMETER | 1.5000 INCHES MINIMUM AND 1.5010 INCHES MAXIMUM |
| BODY INSIDE DIAMETER | 1.1130 INCHES MINIMUM AND 1.1190 INCHES MAXIMUM |
| FLANGE OUTSIDE DIAMETER | 1.7450 INCHES MINIMUM AND 1.7550 INCHES MAXIMUM |
| FLANGE WIDTH | 0.1000 INCHES MINIMUM AND 0.1050 INCHES MAXIMUM |
| CORNER SHAPE | SQUARE INSIDE RIGHT CORNER |
| CORNER SHAPE | SQUARE INSIDE LEFT CORNER |
| CORNER SHAPE | SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER |
| CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER |
| CORNER SHAPE | SQUARE LEFT FLANGE BODY CORNER |
| CORNER SHAPE | SQUARE OUTSIDE RIGHT CORNER |
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| SURFACE FINISH | 125.0 MICROINCHES OVERALL |
| MATERIAL | STEEL COMP E4340 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000,COND C MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYLE DESIGNATOR | SOLID, EXTERNAL FLANGE ONE END |
| A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 18 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW. |
0
