Part Number: 709-2439605 PIECE 14

(No reviews yet) Write a Review
CONDITION:
NS
NAVAL SHIP SYSTEMS COMMAND80064
ELECTRIC BOAT CORPORATION96169
NAVAL SHIP SYSTEMS COMMAND80064
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.625 INCHES NOMINAL
FASTENER LENGTH5.906 INCHES NOMINAL
HEAD STYLEROUND W/WRENCH FLATS
HEAD DIAMETER1.000 INCHES NOMINAL
HEAD HEIGHT0.188 INCHES NOMINAL
WIDTH BETWEEN FLATS0.844 INCHES NOMINAL
SHOULDER DIAMETER0.747 INCHES MINIMUM FIRST SHOULDER AND 0.749 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH5.281 INCHES NOMINAL FIRST SHOULDER
NOMINAL THREAD DIAMETER0.500 INCHES
THREAD QUANTITY PER INCH13
SHOULDER SHAPEROUND FIRST SHOULDER
SPECIAL FEATURESGRIP SURFACE FINISH 63.0 MICROINCHES
MATERIALNICKEL ALLOY K-500 OVERALL OR NICKEL ALLOY 502 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-286 FED SPEC ALL MATERIAL RESPONSES OVERALL
THREAD SERIES DESIGNATORUNC
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.625 INCHES NOMINAL
FASTENER LENGTH5.906 INCHES NOMINAL
HEAD STYLEROUND W/WRENCH FLATS
HEAD DIAMETER1.000 INCHES NOMINAL
HEAD HEIGHT0.188 INCHES NOMINAL
WIDTH BETWEEN FLATS0.844 INCHES NOMINAL
SHOULDER DIAMETER0.747 INCHES MINIMUM FIRST SHOULDER AND 0.749 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH5.281 INCHES NOMINAL FIRST SHOULDER
NOMINAL THREAD DIAMETER0.500 INCHES
THREAD QUANTITY PER INCH13
SHOULDER SHAPEROUND FIRST SHOULDER
SPECIAL FEATURESGRIP SURFACE FINISH 63.0 MICROINCHES
MATERIALNICKEL ALLOY K-500 OVERALL OR NICKEL ALLOY 502 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-286 FED SPEC ALL MATERIAL RESPONSES OVERALL
THREAD SERIES DESIGNATORUNC
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 1 ( .19 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 1 ( .19 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 1 ( .19 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.