| HAMILTON SUNDSTRAND CORPORATION | 73030 |
| INSIDE DIAMETER | 4.975 INCHES NOMINAL |
| OUTSIDE DIAMETER | 6.180 INCHES NOMINAL |
| OVERALL THICKNESS | 0.038 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
| HARDNESS RATING | 68.0 ROCKWELL SUPERFICIAL 30-T MINIMUM AND 74.0 ROCKWELL SUPERFICIAL 30-T MAXIMUM |
| MATERIAL | COPPER ALLOY |
| MATERIAL THICKNESS | 0.038 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE 70A OR 70C ASSN STD SINGLE MATERIAL RESPONSE |
| A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE. |
12Z12002-40
$0.00
A3003979-40
$0.00
40-3097010A
$0.00
4002-40
$0.00