Part Number: 99867-8

(No reviews yet) Write a Review
CONDITION:
NS
HONEYWELL INTERNATIONAL INC.59364
HONEYWELL INTERNATIONAL INC.70210
ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO72599
HONEYWELL INTERNATIONAL INC.99193
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.385 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
PERIPHERAL SHAPE STYLEROUND
CENTER HOLE SHAPE STYLEROUND
THICKNESS0.0262 INCHES MINIMUM AND 0.0267 INCHES MAXIMUM
OVERALL DIAMETER0.560 INCHES MINIMUM AND 0.590 INCHES MAXIMUM
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM
MATERIALNICKEL ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5542 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATOR23 ROUND
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch ( .8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be . 6 inches ( .15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be . 16 inches ( .4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.