FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | 58536 |
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | 81348 |
DAIMLER CHRYSLER | 12204 |
GENERAL MOTORS CORP | 24617 |
MORRIS MATERIAL HANDLING, INC. | 27315 |
MORRIS MATERIAL HANDLING, INC. | 27315 |
FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES | 23040 |
FORD MOTOR CO | 57526 |
E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | SCY13 |
FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | 58536 |
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
THREAD CLASS | 2B |
THREAD DIRECTION | RIGHT-HAND |
NUT STYLE | CAP |
NUT HEIGHT | 0.406 INCHES NOMINAL |
WIDTH ACROSS FLATS | 0.362 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
THREAD SERIES | UNF |
THREAD QUANTITY PER INCH | 32 |
NOMINAL THREAD SIZE | 0.190 INCHES |
BEARING SURFACE TYPE | CHAMFERED |
MATERIAL | STEEL COMP 1018 OVERALL OR STEEL COMP 1020 OVERALL OR STEEL COMP 1118 OVERALL |
MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A576 ASSN STD ALL MATERIAL RESPONSES OVERALL |
SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 15 STYLE |
THREAD CLASS | 2B |
THREAD DIRECTION | RIGHT-HAND |
NUT STYLE | CAP |
NUT HEIGHT | 0.406 INCHES NOMINAL |
WIDTH ACROSS FLATS | 0.362 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
THREAD SERIES | UNF |
THREAD QUANTITY PER INCH | 32 |
NOMINAL THREAD SIZE | 0.190 INCHES |
BEARING SURFACE TYPE | CHAMFERED |
MATERIAL | STEEL COMP 1018 OVERALL OR STEEL COMP 1020 OVERALL OR STEEL COMP 1118 OVERALL |
MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A576 ASSN STD ALL MATERIAL RESPONSES OVERALL |
SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 15 STYLE |
AN ITEM INTERNALLY THREADED FROM ONE END, AND COMPLETELY INCLOSED ON THE OPPOSITE END. THE OUTER PERIPHERY PARALLEL TO THE THREADED AXIS MAY BE SQUARE, CYLINDRICAL, HEXAGONAL, OCTAGONAL, OR DODECAGONAL AND TAPER TO A CONE OR DOME SHAPE ON THE CLOSED END. FOR LIKE ITEMS WHICH ARE STAMPED OR FORMED FROM SHEET STOCK, SEE NUT (1), STAMPED. FOR SIMILAR ITEMS WHICH ARE FLAT ON TOP AND BOTTOM SEE NUT (1), SLEEVE OR POST, ELECTRICAL-MECHANICAL EQUIPMENT. |