Part Number: A02D2509-4

(No reviews yet) Write a Review
CONDITION:
NS
CREATIVE PRECISION, INC.0F3N2
THE BOEING COMPANY77272
HOLE DIAMETER1.135 INCHES MINIMUM AND 1.150 INCHES MAXIMUM
OUTSIDE DIAMETER1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM
MATERIAL THICKNESS0.205 INCHES NOMINAL
TOP RECESS DIAMETER1.285 INCHES MINIMUM AND 1.305 INCHES MAXIMUM
BOTTOM RECESS ANGLE90.0 DEGREES NOMINAL
TOP RECESS ANGLE90.0 DEGREES NOMINAL
BOTTOM RECESS DIAMETER1.285 INCHES MINIMUM AND 1.305 INCHES MAXIMUM
MATERIALSTEEL COMP 4130 OVERALL
SURFACE TREATMENTCADMIUM OVERALL
STYLE DESIGNATORRECESSED BOTH SIDES
HOLE DIAMETER1.135 INCHES MINIMUM AND 1.150 INCHES MAXIMUM
OUTSIDE DIAMETER1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM
MATERIAL THICKNESS0.205 INCHES NOMINAL
TOP RECESS DIAMETER1.285 INCHES MINIMUM AND 1.305 INCHES MAXIMUM
BOTTOM RECESS ANGLE90.0 DEGREES NOMINAL
TOP RECESS ANGLE90.0 DEGREES NOMINAL
BOTTOM RECESS DIAMETER1.285 INCHES MINIMUM AND 1.305 INCHES MAXIMUM
MATERIALSTEEL COMP 4130 OVERALL
SURFACE TREATMENTCADMIUM OVERALL
STYLE DESIGNATORRECESSED BOTH SIDES
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.