Part Number: A02D2509-5

(No reviews yet) Write a Review
CONDITION:
NS
CREATIVE PRECISION, INC.0F3N2
THE BOEING COMPANY77272
DELTA MACHINE & TOOL COMPANY9N156
HOLE DIAMETER0.505 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
OUTSIDE DIAMETER0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
MATERIAL THICKNESS0.188 INCHES NOMINAL
TOP RECESS DIAMETER0.604 INCHES MINIMUM AND 0.620 INCHES MAXIMUM
BOTTOM RECESS ANGLE45.0 DEGREES NOMINAL
TOP RECESS ANGLE45.0 DEGREES NOMINAL
BOTTOM RECESS DIAMETER0.604 INCHES MINIMUM AND 0.620 INCHES MAXIMUM
MATERIALSTEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 COND F MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
STYLE DESIGNATORRECESSED BOTH SIDES
HOLE DIAMETER0.505 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
OUTSIDE DIAMETER0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
MATERIAL THICKNESS0.188 INCHES NOMINAL
TOP RECESS DIAMETER0.604 INCHES MINIMUM AND 0.620 INCHES MAXIMUM
BOTTOM RECESS ANGLE45.0 DEGREES NOMINAL
TOP RECESS ANGLE45.0 DEGREES NOMINAL
BOTTOM RECESS DIAMETER0.604 INCHES MINIMUM AND 0.620 INCHES MAXIMUM
MATERIALSTEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 COND F MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
STYLE DESIGNATORRECESSED BOTH SIDES
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.