Part Number: AF3213-4-04

(No reviews yet) Write a Review
CONDITION:
NS
ALLFAST FASTENING SYSTEMS, LLC53551
ALLFAST FASTENING SYSTEMS, LLC53551
SPS TECHNOLOGIES, LLC11815
SPS TECHNOLOGIES, LLC11815
SPS TECHNOLOGIES, LLC11815
ALCOA GLOBAL FASTENERS, INC.92215
ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBHC4293
AERO STOCKFB011
SPS TECHNOLOGIES, LLC11815
HUCK INTERNATIONAL, INC.0HDW7
HUCK INTERNATIONAL, INC.17446
BOEING COMPANY, THE8V613
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
AIRBUS HELICOPTERS DEUTSCHLAND GMBH- ENTWICKLUNGC0418
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
FASTENER LENGTH0.319 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
HEAD STYLEUNIVERSAL
HEAD HEIGHT0.054 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
SHANK DIAMETER0.125 INCHES MINIMUM AND 0.129 INCHES MAXIMUM
HEAD MAJOR DIAMETER0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
EXPANSION DEVICESERRATED STEM-TYPE W
GRIP LENGTH0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
SPECIAL FEATURESNS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY.
MATERIALALUMINUM ALLOY 5056 SLEEVE
MATERIALSTEEL COMP 8740 STEM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE
SURFACE TREATMENTCADMIUM STEM AND CHROMATE STEM
SURFACE TREATMENTCHROMATE SLEEVE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STEM
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.