Part Number: AN3-4

(No reviews yet) Write a Review
CONDITION:
NS
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE88044
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
EMBRAER S.A. DBA EMBRAER001JK
EMBRAER AVIATION INTERNATIONALFB459
EMBRAER EMPRESA BRASILEIRA DE AERONAUTICA SAS4956
RAYTHEON TECHNICAL SERVICES COMPANY36378
RAYTHEON TECHNICAL SERVICES COMPANY36378
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.406 INCHES MINIMUM
FASTENER LENGTH0.531 INCHES NOMINAL
HEAD STYLEHEXAGON
HEAD HEIGHT0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
WIDTH BETWEEN FLATS0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM
SHANK UNTHREADED HOLE DIAMETER0.070 INCHES MINIMUM FIRST HOLE
NOMINAL THREAD DIAMETER0.190 INCHES
GRIP LENGTH0.125 INCHES NOMINAL
FEATURES PROVIDEDFINISHED HEAD
THREAD QUANTITY PER INCH32
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
HARDNESS RATING26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.391 INCHES NOMINAL FIRST HOLE
MATERIALSTEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4037 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OVERALL OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD SERIES DESIGNATORUNF
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of .19 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of . 15 inch ( . 38 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.