| AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | 88044 |
| MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
| MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
| MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
| NONMETALLIC HARDNESS RATING | 45.0 MINIMUM DUROMETER AND 55.0 MAXIMUM DUROMETER |
| OVERALL LENGTH | 1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM |
| BODY DIAMETER | 1.115 INCHES NOMINAL |
| CENTER HOLE DIAMETER | 0.938 INCHES NOMINAL |
| DESIGN TYPE | SINGLE CENTRALLY LOCATED HOLE |
| MATERIAL | RUBBER CHLOROPRENE CLASS CR |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-STD-417, TYPE S, CLASS SC, GRADE SC515A1B1C1E3E5F2GM MIL STD SINGLE MATERIAL RESPONSE |
| STYLE DESIGNATOR | ROUND |
| SPLIT DESIGN FEATURE | NOT INCLUDED |
| MATERIAL | RUBBER, SYNTHETIC, MIL-STD-417, TYPE S, CLASS SC, GRADE SC515A1B1C1E3E5F2GM |
| An item, made of rubber or plastic, usually cylindrical, with or without a flange, having one or more holes extending through its entire length, usually parallel to its axis. The overall length must exceed 25 percent of its diameter or a distance across the peripheral flats for items without a flange. For items formed of other material see BUSHING, SLEEVE. Excludes BUMPER, NONMETALLIC and GROMMET NONMETALLIC. |
AN3420-3
$0.00
MS3418-18A
$0.00
MS3420-18A
$0.00
NAS1003-18A
$0.00
18AH-03
$0.00