Part Number: AN515-6-6

(No reviews yet) Write a Review
CONDITION:
NS
UNITED TECHNOLOGIES CORPORATION77445
LAWRENCE ENGINEERING AND SUPPLY INC4348
NOR-CAL SUPPLY CO.INC.7851
AIR INDUSTRIES CO INC8938
HUCK INTERNATIONAL, INC.17446
F AND C SALES INC30902
APCOM INC50568
PLASTIC AND METAL PRODUCTS CORPORATION53606
SPS TECHNOLOGIES, LLC56878
FASTENER INNOVATION TECHNOLOGY, INC.58998
HI-SHEAR CORPORATION73197
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
SPS TECHNOLOGIES, LLC80539
ALCOA GLOBAL FASTENERS, INC.92215
HUCK INTL INC97928
KLX AEROSPACE SOLUTIONS II SASF7652
C.M.P.FB009
LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INCL4528
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
FASTENER LENGTH0.449 INCHES MINIMUM AND 0.479 INCHES MAXIMUM
HEAD STYLEPAN
HEAD DIAMETER0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
GRIP DIAMETER0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
INTERNAL DRIVE STYLEHIGH-TORQUE
NOMINAL THREAD DIAMETER0.190 INCHES
GRIP LENGTH0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
THREAD QUANTITY PER INCH32
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES THREADS
MATERIALIRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNJF
SPECIFICATION/STANDARD DATA80205-NAS1133 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth ( . 1 IN.) ( . 25 mm) or less of a specific diameter for items (1. IN.) (25 mm) or less in diameter. Items over (1. IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths ( . 15 IN.) ( . 38 mm) or less. The nominal major diameter of the threads shall be at least one thousandth ( . 1 IN.) ( . 25 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.