| AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | 88044 |
| EATON-AEROQUIP LLC. | 624 |
| MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
| PARKER-HANNIFIN CORPORATION | 98441 |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| INSIDE DIAMETER | 0.406 INCHES NOMINAL |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND 160.0 DEG FAHRENHEIT SINGLE RESPONSE |
| OUTSIDE DIAMETER | 0.766 INCHES NOMINAL |
| MINIMUM INSIDE BENDING RADIUS | 4.625 INCHES |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| HYDROSTATIC TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OIL RESISTANT |
| VACUUM IN TORR | 50.8 |
| INSIDE SURFACE CONDITION | SMOOTH |
| MEASURING METHOD AND LENGTH | 17.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| SPECIFICATION/STANDARD DATA | 96906-MS28741-8-0170 GOVERNMENT STANDARD |
| A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT; and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING. |
AN6271-8-8
$0.00
AN6271-8-19
$0.00
AN6271-4-12
$0.00
HL20-8-17
$0.00
HLT427-8-17
$0.00
HL64-8-17
$0.00
HL220-8-17
$0.00
59050-17-8
$0.00