| AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | 88044 |
| SOCIETY OF AUTOMOTIVE ENGINEERS INC | 81343 |
| THREAD CLASS | 3A EXTERNAL |
| THREAD DIRECTION | RIGHT-HAND EXTERNAL |
| THREAD LENGTH | 0.265 INCHES NOMINAL EXTERNAL |
| HEAD HEIGHT | 0.234 INCHES NOMINAL |
| OVERALL LENGTH | 0.562 INCHES NOMINAL |
| CONNECTION STYLE | PLAIN |
| BODY CORE DIAMETER | 0.125 INCHES NOMINAL |
| CORE DEPTH | 0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| BLEEDER HOLE CENTER TO THREADED END DISTANCE | 0.125 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| BLEEDER HOLE DIAMETER | 0.062 INCHES NOMINAL |
| NOMINAL THREAD SIZE | 0.375 INCHES EXTERNAL |
| SEAT ANGLE | 45.0 DEGREES |
| MATERIAL | STEEL COMP 347 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| III SURFACE TREATMENT | PASSIVATE OVERALL |
| STYLE DESIGNATOR | PLUG, MACHINE W/BLEEDER HOLES |
| THREAD SERIES DESIGNATOR | UNF EXTERNAL |
| END CONNECTION STYLE | J1 PLAIN |
| SCREW THREAD SERIES DESIGNATOR | UNF EXTERNAL |
| MAXIMUM OPERATING PRESSURE AND MEDIA FOR WHICH DESIGNED | NOT RATED |
| MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED | NOT RATED |
| An item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED. |
