PLUG,MACHINE THREAD,
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | 88044 |
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | 88044 |
THREAD CLASS | 3A EXTERNAL |
THREAD DIRECTION | RIGHT-HAND EXTERNAL |
THREAD LENGTH | 0.300 INCHES NOMINAL EXTERNAL |
HEAD HEIGHT | 0.250 INCHES NOMINAL |
OVERALL LENGTH | 0.625 INCHES NOMINAL |
CONNECTION STYLE | PLAIN |
BODY CORE DIAMETER | 0.234 INCHES NOMINAL |
CORE DEPTH | 0.265 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
BLEEDER HOLE CENTER TO THREADED END DISTANCE | 0.157 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
BLEEDER HOLE DIAMETER | 0.062 INCHES NOMINAL |
NOMINAL THREAD SIZE | 0.500 INCHES EXTERNAL |
SEAT ANGLE | 45.0 DEGREES |
MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
III SURFACE TREATMENT | ANODIZE OVERALL |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
STYLE DESIGNATOR | PLUG, MACHINE W/BLEEDER HOLES |
THREAD SERIES DESIGNATOR | UNF EXTERNAL |
END CONNECTION STYLE | J1 PLAIN |
SCREW THREAD SERIES DESIGNATOR | UNF EXTERNAL |
MAXIMUM OPERATING PRESSURE AND MEDIA FOR WHICH DESIGNED | NOT RATED |
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED | NOT RATED |
An item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED. |