| SPS TECHNOLOGIES, LLC | 11815 |
| MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
| FASTENER LENGTH | 0.482 INCHES MAXIMUM |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| SHANK DIAMETER | 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| SHANK STYLE | PULL THROUGH HOLLOW SHANK |
| HEAD MAJOR DIAMETER | 0.225 INCHES NOMINAL |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| GRIP LENGTH | 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| SHEAR STRENGTH | 125 SINGLE POUNDS PER SQUARE INCH |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATERIAL | ALUMINUM ALLOY 2117 SLEEVE |
| MATERIAL | ALUMINUM ALLOY 2117 STEM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-W-7986 MIL SPEC SINGLE MATERIAL RESPONSE SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-W-7986 MIL SPEC SINGLE MATERIAL RESPONSE STEM |
| SURFACE TREATMENT | ANODIZE SLEEVE AND CHROMATE SLEEVE |
| SURFACE TREATMENT | ANODIZE STEM AND CHROMATE STEM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE SLEEVE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE STEM OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE STEM |
| An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY. |
F11414-6-4
$0.00
HL325-6-4
$0.00
CR2563-6-4
$0.00
CR3283-6-4
$0.00
ER919-6-4
$0.00