| SCHROEDER INDUSTRIES LLC | 8832 |
| SCHROEDER INDUSTRIES LLC | 8832 |
| BODY DIAMETER | 2.562 INCHES NOMINAL |
| FILTRATION RATING IN MICRONS | 10.0 NOMINAL |
| FLOW DIRECTION | OUTSIDE IN |
| DESIGN TYPE | REUSABLE |
| TEMP RATING | 250.0 DEG FAHRENHEIT MAXIMUM |
| BODY OVERALL LENGTH | 4.875 INCHES NOMINAL |
| FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE |
| FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| MATERIAL | RUBBER SEAL |
| MATERIAL | STEEL FILTERING MEDIUM |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
| TERMINAL TYPE AND QUANTITY | 4 TAB W/SCREW |
| A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 5 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT. |
ADM101EARMZ
$0.00
6308-V
$0.00
V-SW
$0.00
V.3225
$0.00