Part Number: DPR7900-10-B-2

(No reviews yet) Write a Review
CONDITION:
NS
HUCK INTL INC97928
DEUTSCH FASTENER CORP8524
HUCK INTERNATIONAL, INC.0HDW7
HUCK INTL INC97928
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
HEAD DIAMETER0.300 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
MATERIAL ACCOMMODATED THICKNESS0.090 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
NOMINAL THREAD DIAMETER0.190 INCHES
THREAD QUANTITY PER INCH32
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
MATERIALSTEEL COMP 302 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 347 OVERALL OR STEEL COMP 384 OVERALL OR STEEL COMP 385 OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNF
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.