Part Number: E102170-39

(No reviews yet) Write a Review
CONDITION:
NS
CONTROL FLOW, INC.16603
CONTROL FLOW, INC.3X894
PEAK TECHNOLOGIES GROUP INC THE3S894
PEAK TECHNOLOGIES GROUP INC THE3S894
CONTROL FLOW, INC.3X894
CONTROL FLOW, INC.3X894
CONTROL FLOW, INC.16603
CONTROL FLOW, INC.3X894
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
TRELLEBORG SEALING SOLUTIONS US, INC.9257
SHAMBAN POLYMER TECH GROUP97820
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
CENTER HOLE DIAMETER11.019 INCHES MINIMUM AND 11.029 INCHES MAXIMUM
PERIPHERAL DIAMETER11.494 INCHES MINIMUM AND 11.498 INCHES MAXIMUM
JOINT TYPESCARF-PERIPHERAL RETAINER
CUT TYPEDIAGONAL OVERALL
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the PACKING, PREFORMED or O-RING, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine PACKING MATERIAL. It may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. It may have holes or joints for mounting, be threaded or unthreaded. See also PACKING NUT and PACKING NUT, STUFFING TUBE.