Part Number: E108609 FIND 246

(No reviews yet) Write a Review
CONDITION:
NS
CONTROL FLOW, INC.3X894
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
CONTROL FLOW, INC.3X894
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH2.000 INCHES MINIMUM AND 2.277 INCHES MAXIMUM
FASTENER LENGTH5.000 INCHES NOMINAL
HEAD STYLEHEXAGON
HEAD HEIGHT0.531 INCHES MINIMUM AND 0.563 INCHES MAXIMUM
WIDTH BETWEEN FLATS1.285 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
NOMINAL THREAD DIAMETER0.875 INCHES
THREAD QUANTITY PER INCH9
MINIMUM TENSILE STRENGTH110000 POUNDS PER SQUARE INCH
HARDNESS RATING22.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM YIELD STRENGTH78000 POUNDS PER SQUARE INCH
MATERIALSTEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNC
TEST DATA DOCUMENT81349-MILR26-5 SPECIFICATION
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of .19 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.