Part Number: F7500-10-B-4

(No reviews yet) Write a Review
CONDITION:
NS
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
HUCK INTERNATIONAL, INC.0HDW7
HUCK INTL INC97928
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM
FASTENER LENGTH1.362 INCHES MINIMUM AND 1.397 INCHES MAXIMUM
HEAD STYLEFLAT CHAMFER
HEAD DIAMETER0.451 INCHES NOMINAL
HEAD HEIGHT0.675 INCHES NOMINAL
INTERNAL DRIVE STYLESLOT
MATERIAL ACCOMMODATED THICKNESS0.032 INCHES MINIMUM AND 0.093 INCHES MAXIMUM
NOMINAL THREAD DIAMETER0.190 INCHES
THREAD QUANTITY PER INCH32
MATERIALSTEEL COMP 302 FASTENER
MATERIALSTEEL COMP 301 PRIMARY WASHER
MATERIALSTEEL COMP 301 SECONDARY WASHER
MATERIALSTEEL COMP 304 STAND-OFF
MATERIALSTEEL COMP 302 SPRING
MATERIALSTEEL COMP 303 HEAD
MATERIAL DOCUMENT AND CLASSIFICATIONASTMA493 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE HEAD
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE SPRING
SURFACE TREATMENTPASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNF
HEAD STYLEC49 FLAT CHAMFER
INTERNAL DRIVE STYLED14 SLOT
PROPRIETARY CHARACTERISTICSMRCS
THREAD SERIES DESIGNATORUNC
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.