| FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | 81348 |
| GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE | 80244 |
| GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE | 80244 |
| THREAD CLASS | 2A |
| WING SPREAD WIDTH | 0.750 INCHES MINIMUM |
| LENGTH | 2.880 INCHES MINIMUM AND 3.120 INCHES MAXIMUM |
| NOMINAL THREAD DIAMETER | 0.138 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| SPECIAL FEATURES | BSLOTTED, ROUND HEAD MACHINE SCREW TOGGLE BOLTS ARE SELF-CONTAINED ANCHORING DEVICES W/TWO-PIECE, SPRING, SHEET METAL WINGS WHICH AUTOMATICALLY OPEN OR SWING INTO PLACE AFTER BEING PUSHED THROUGH AN OPEN HOLE ACCESSIBLE FROM ONE SIDE ONLY; TRUNNION NUT MATERIAL DIE CAST ZINC; WINGS ARE PIVOTED EITHER ON TRUNNION NUTS OR PINS AND HELD NORMALLY IN OPEN POSITION BY A SPRING PLACED INSIDE THE U OR CHANNEL SHAPE WING GROOVE; PROOF LOAD 175 LBS. MINIMUM |
| MATERIAL | STEEL OVERALL |
| SURFACE TREATMENT | ZINC OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633,FE/ZN 5,TY3 ASSN STD ALL TREATMENT RESPONSES OVERALL |
| STYLE DESIGNATOR | SPRING-WING, SHEET METAL, MACHINE SCREW |
| THREAD SERIES DESIGNATOR | UNC |
| NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND A CLASS AND 1 STYLE |
| AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER HAVING A WING OR WINGS MOUNTED ON THE BOLT HEAD OR ON A TRUNNION NUT. THE WING OR WINGS UPSET WHEN THE TOGGLE BOLT IS INSERTED IN A CONSTRICTED PASSAGE IN A HOLLOW WALL AND WHEN THE BOLT IS TIGHTENED, THE WING OR WINGS ASSUME A TRANSVERSE OR ATHWART POSITION. IT IS USED FOR SECURELY HOLDING FIXTURES OR DEVICES TO HOLLOW WALLS. |
FF-B-575
$0.00
FF-B-171
$0.00
FF-B-187/01
$0.00
FF-B-171/03
$0.00
FF-B-187/1
$0.00