HILOC,
| ARCONIC GLOBAL FASTENERS & RINGS, INC. | 6950 |
| SPS TECHNOLOGIES, LLC | 56878 |
| HI-SHEAR CORPORATION | 73197 |
| LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | L4528 |
| SPS TECHNOLOGIES, LLC | 56878 |
| HI-SHEAR CORPORATION | 73197 |
| ALCOA GLOBAL FASTENERS, INC. | 92215 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| FASTENER LENGTH | 1.607 INCHES MINIMUM AND 1.627 INCHES MAXIMUM |
| HEAD STYLE | FLUSH COUNTERSUNK |
| WIDTH BETWEEN FLATS | 0.0067 INCHES MINIMUM AND 0.0947 INCHES MAXIMUM |
| SHANK DIAMETER | 0.2707 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| HEAD MAJOR DIAMETER | 0.5060 INCHES MINIMUM AND 0.6018 INCHES MAXIMUM |
| END ITEM IDENTIFICATION | W/S: AIRCRAFT, STRATOLIFTER C-135 |
| GRIP LENGTH | 1.307 INCHES MINIMUM AND 1.317 INCHES MAXIMUM |
| MINIMUM TENSILE STRENGTH | 5820 POUNDS PER SQUARE INCH |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| SPECIAL FEATURES | PIN AND COLLAR COMBINATION |
| MATERIAL | STEEL COMP E4340 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 8740 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TY2, CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THREAD SERIES DESIGNATOR | UNJF |
| A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque. |
