| SPS TECHNOLOGIES, LLC | 6725 |
| ARCONIC GLOBAL FASTENERS & RINGS, INC. | 6950 |
| HUCK INTERNATIONAL, INC. | 17446 |
| SPS TECHNOLOGIES, LLC | 56878 |
| WEST COAST AEROSPACE INC | 60516 |
| HI-SHEAR CORPORATION | 73197 |
| LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | L4528 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| FASTENER LENGTH | 1.760 INCHES MINIMUM AND 1.780 INCHES MAXIMUM |
| HEAD STYLE | ERR-090 |
| HEAD HEIGHT | 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| WIDTH BETWEEN FLATS | 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM |
| SHANK DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| HEAD MAJOR DIAMETER | 0.387 INCHES MINIMUM AND 0.412 INCHES MAXIMUM |
| LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| GRIP LENGTH | 1.370 INCHES MINIMUM AND 1.385 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 28 |
| MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| SHEAR STRENGTH | 10600 DOUBLE POUNDS PER SQUARE INCH |
| MATERIAL | STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYP II,CLS 2 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| THREAD SERIES DESIGNATOR | UNJF |
| A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque. |
HLT116-8-18
$0.00
HLT116-6WC
$0.00
HLT116-5SV
$0.00
HLT116-5VS
$0.00
HLT116-50W
$0.00