Part Number: HT4060V3-3

(No reviews yet) Write a Review
CONDITION:
NS
ARCONIC GLOBAL FASTENERS & RINGS, INC.6950
HUCK INTERNATIONAL, INC.17446
HI-SHEAR CORPORATION73197
SPS TECHNOLOGIES, LLC80539
ALCOA GLOBAL FASTENERS, INC.92215
HUCK INTL INC97928
LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INCL4528
ARCONIC GLOBAL FASTENERS & RINGS, INC.6950
HUCK INTERNATIONAL, INC.17446
GRIMES AEROSPACE COMPANY72914
HI-SHEAR CORPORATION73197
SPS TECHNOLOGIES, LLC80539
GRIMES AEROSPACE CO89513
ALCOA GLOBAL FASTENERS, INC.92215
HUCK INTL INC97928
LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INCL4528
BOEING COMPANY, THE76301
ALCOA GLOBAL FASTENERS, INC.92215
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM
FASTENER LENGTH0.578 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
HEAD DIAMETER0.377 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD HEIGHT0.032 INCHES MINIMUM AND 0.034 INCHES MAXIMUM
SHOULDER DIAMETER0.2177 INCHES MINIMUM AND 0.2182 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH0.144 INCHES MINIMUM AND 0.166 INCHES MAXIMUM FIRST SHOULDER
INTERNAL DRIVE STYLEHIGH-TORQUE
NOMINAL THREAD DIAMETER0.190 INCHES
THREAD QUANTITY PER INCH32
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
SHOULDER SHAPEROUND FIRST SHOULDER
MATERIALTITANIUM ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4967,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD SERIES DESIGNATORUNJF
HEAD STYLEC51 FLAT COUNTERSUNK UNDERCUT
SHOULDER DIAMETER0.2177 INCHES MINIMUM FIRST SHOULDER AND 0.2182 INCHES MAXIMUM
SHOULDER LENGTH0.144 INCHES MINIMUM FIRST SHOULDER AND 0.166 INCHES MAXIMUM
INTERNAL DRIVE STYLED9 HIGH-TORQUE
An externally threaded fastener whose threaded portion is of one nominal diameter, No ( . 6 IN.) (1.5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is designed to be driven with either a wrench or an inserted driver or both in sizes below No. 1 ( .19 IN.) (5 mm) nominal diameter. No. 1 ( .19 IN.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. A locking feature may be incorporated in the design of the head or threads. For items which are both shouldered and have an externally relieved body, use SCREW, EXTERNALLY RELIEVED BODY. For items with a No. 1 ( .19 IN.) (5 mm) or larger thread diameter without an inserted driver head, use BOLT, SHOULDER. Excludes BOLT, INTERNAL WRENCHING and SCREW, CAP, SOCKET HEAD.