Part Number: J-30039

(No reviews yet) Write a Review
CONDITION:
NS
MULTEK FLEXIBLE CIRCUITS, INC.7955
FUGLE-MILLER LABORATORIES91709
HOLE DIAMETER0.3125 INCHES NOMINAL FIRST
OVERALL LENGTH1.6250 INCHES NOMINAL
BODY OUTSIDE DIAMETER4.3308 INCHES MINIMUM AND 4.3317 INCHES MAXIMUM
BODY INSIDE DIAMETER3.0000 INCHES NOMINAL
FLANGE OUTSIDE DIAMETER5.7500 INCHES NOMINAL
FLANGE WIDTH0.7500 INCHES NOMINAL
LEFT INTERNAL FLANGE HOLE DIAMETER2.4385 INCHES MINIMUM AND 2.4390 INCHES MAXIMUM
LEFT INTERNAL FLANGE WIDTH1.2500 INCHES NOMINAL
CORNER SHAPECHAMFERED INSIDE LEFT CORNER
CORNER SHAPECHAMFERED OUTSIDE LEFT CORNER
CORNER SHAPECHAMFERED OUTSIDE RIGHT CORNER
CORNER SHAPERELIEF GROOVE LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
SURFACE FINISH63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
ANTIROTATION/LUBRICATION TYPE AND QUANTITY3 HOLE
SPECIAL FEATURESANTIROTATION HOLES ON FLANGE ARE THREADED 18-UNC 2B; COAT ALL SURFACES WITH A CORROSION PREVENTIVE PER MIL-C-16173 GRADE 1
MATERIALSTEEL COMP 1141 OVERALL
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END, INTERNAL FLANGE ONE END
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 18 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.