| ROCKWELL AUTOMATION, INC. | 1121 |
| SECTION QUANTITY | 1 |
| BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| FIRST FLAT LENGTH | 0.625 INCHES NOMINAL |
| FLAT HEIGHT | 0.216 INCHES NOMINAL |
| BODY DIAMETER | 1.156 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| SHAFT LENGTH | 3.000 INCHES NOMINAL |
| MOUNTING BUSHING LENGTH | 0.500 INCHES NOMINAL |
| BODY LENGTH | 0.625 INCHES MAXIMUM |
| SHAFT STYLE | ROUND, FLATTED |
| ACTUATOR TYPE | SINGLE SHAFT |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 292.0 NOMINAL |
| MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES |
| MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 192.00 INCH-OUNCES |
| NONTURN DEVICE LOCATION | AT 3 OCLOCK |
| NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL |
| MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 1.5 |
| SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SCREW THREAD QUANTITY PER INCH | 32 |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| MOUNTING METHOD | STANDARD BUSHING |
| ELECTRICAL RESISTANCE PER SECTION | 25.0 KILOHMS SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 312.0 NOMINAL |
| RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | +0.0 TO 7.0 -55 DEG CELSIUS SINGLE SECTION AND +0.0 TO 3.5 -25 DEG CELSIUS SINGLE SECTION AND +0.0 TO 2.0 0 DEG CELSIUS SINGLE SECTION AND -2.5 TO 2.5 85 DEG CELSIUS SINGLE SECTION AND +0.0 TO 5.5 120 DEG CELSIUS SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.25 HEAT SINK SINGLE SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. |
