Part Number: M16377-53-002

(No reviews yet) Write a Review
CONDITION:
NS
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
INSIDE DIAMETER0.250 INCHES NOMINAL
THREAD LENGTH0.500 INCHES NOMINAL
HOLE DIAMETER0.185 INCHES NOMINAL
GROOVE WIDTH0.250 INCHES NOMINAL
GRIPPING SURFACE CONDITIONSMOOTH
SHAFT ACCOMMODATION STYLEROUND
OVERALL LENGTH3.625 INCHES NOMINAL
MOUNTING FACILITY LENGTH0.183 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.562 INCHES NOMINAL
MOUNTING FACILITY WIDTH2.250 INCHES NOMINAL
OUTSIDE DIAMETER0.750 INCHES NOMINAL
ACCOMMODATED SHAFT DIAMETER0.750 INCHES NOMINAL
SHAFT LENGTH0.500 INCHES NOMINAL
PLATE WIDTH1.750 INCHES NOMINAL
SQUARE SHAFT WIDTH0.189 INCHES NOMINAL
END ITEM IDENTIFICATIONVARIOUS
PLATE LENGTH3.625 INCHES NOMINAL
MOUNTING FACILITY QUANTITY6
MOUNTING PLATE STYLERECTANGULAR (EDGES MAY BE SQUARED OR BEVELED)
INTEGRAL SHAFT STYLETHREADED
MOUNTING METHODTHREADED STUD
MOUNTING FACILITY DIAMETER2.250 INCHES NOMINAL
NOMINAL THREAD SIZE0.166 INCHES
PART NAME ASSIGNED BY CONTROLLING AGENCYHANDLE AND SWITCH, LANTERN
SPECIAL FEATURESTWO FIVE INCH NOMINAL LEADS WITH TERMINAL LUGS FOR A NUMBER EIGHT SCREW FROM EITHER A TOGGLE SWITCH OR A MOMENTARY PUSH BUTTON SWITCH WITH A NEOPRENE BOOT PROVIDED
HEIGHT0.250 INCHES NOMINAL
MATERIALPLASTIC OVERALL
STYLE DESIGNATORCYLINDRICAL
THREAD SERIES DESIGNATORUNC
GENERAL CHARACTERISTICS ITEM DESCRIPTIONSTEEL,QQ-S-636 FS1020,BLACK OXIDE FINISH PER MIL-F-13924,6.812 IN. OD,5.812 IN. ID,TWO 0.438 IN. SQ BY 2.500 IN. LG KEYS SECURED W/SCREWS IN 0.219 IN. DEEP KEYWAYS 180.0 DEG APART ON INSIDE DIA, ONE END CLOSED WITH 1.312 IN. HEX WRENCHING FACILITY,4.000 IN. O/A LG
AN ITEM OF CYLINDRICAL OR PISTOL DESIGN, MADE OF METALLIC OR NONMETALLIC MATERIAL, SPECIFICALLY DESIGNED TO BE USED ON A HANDLE TO PROVIDE A FORMED GRIPPING SURFACE. EXCLUDES TYPES WITH INTEGRAL SWITCH(ES) FOR CONTROL OF ARMAMENT.