| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -1 |
| ELECTRICAL RESISTANCE | 7.500 OHMS |
| RESISTANCE TOLERANCE IN PERCENT | -1 |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -0.366666666666667 |
| INCLOSURE METHOD | ENCAPSULATED |
| TERMINAL TYPE | WIRE LEAD |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.01 |
| BODY DIAMETER | 0.138 INCHES NOMINAL |
| BODY LENGTH | 0.375 INCHES NOMINAL |
| POWER DISSIPATION RATING IN WATTS | 0.500 FREE AIR |
| STYLE DESIGNATOR | AXIAL TERMINAL EACH END |
| TEST DATA DOCUMENT | 81349-MILR39017 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| GENERAL CHARACTERISTICS ITEM DESCRIPTION | AGE ON DRY ICE FOR ONE HOUR FOLLOWED BY ONE HOUR AT APPROXIMATE 650 DEG F,CONSISTS OF ONE EACH CAP PART NUMBER 1357&45B,STRIP PART NUMBER 38415410040,RETAINER PART NUMBER 58135700010 |
| A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors. |
0240-0015J
$0.00