| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| THREAD CLASS | 2A NUT THREAD |
| THREAD CLASS | 5 STUD THREAD |
| THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| THREAD LENGTH | 1.500 INCHES MAXIMUM NUT THREAD |
| THREAD LENGTH | 0.938 INCHES MAXIMUM STUD THREAD |
| OVERALL LENGTH | 3.500 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 5 NUT THREAD |
| THREAD QUANTITY PER INCH | 5 STUD THREAD |
| NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD |
| NOMINAL THREAD SIZE | 0.625 INCHES STUD THREAD |
| MATERIAL | COPPER ALLOY |
| THREAD SERIES DESIGNATOR | UNC NUT THREAD |
| THREAD SERIES DESIGNATOR | UNC STUD THREAD |
| THREAD CLASS | 2A NUT THREAD |
| THREAD CLASS | 5 STUD THREAD |
| THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| THREAD LENGTH | 1.500 INCHES MAXIMUM NUT THREAD |
| THREAD LENGTH | 0.938 INCHES MAXIMUM STUD THREAD |
| OVERALL LENGTH | 3.500 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 5 NUT THREAD |
| THREAD QUANTITY PER INCH | 5 STUD THREAD |
| NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD |
| NOMINAL THREAD SIZE | 0.625 INCHES STUD THREAD |
| MATERIAL | COPPER ALLOY |
| THREAD SERIES DESIGNATOR | UNC NUT THREAD |
| THREAD SERIES DESIGNATOR | UNC STUD THREAD |
| A headless fastener not exceeding 12 inches (3 4.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus . 2 inches ( .5 8 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD. |
