| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| PARKER-HANNIFIN CORPORATION | 98441 |
| FINMECCANICA SPA | A0199 |
| EATON-AEROQUIP LLC. | 624 |
| MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
| MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| INSIDE DIAMETER | 0.438 INCHES NOMINAL |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND 156.0 DEG FAHRENHEIT SINGLE RESPONSE |
| OUTSIDE DIAMETER | 0.859 INCHES NOMINAL |
| MINIMUM INSIDE BENDING RADIUS | 5.750 INCHES |
| END ITEM IDENTIFICATION | AIRCRAFT, C-141 |
| CONNECTION STYLE | SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| BURST TEST PRESSURE | 14000.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| SEAT ANGLE | 12.0 DEGREES 1ST END |
| HYDROSTATIC TEST PRESSURE | 7000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT |
| CRITICALITY CODE JUSTIFICATION | AGAV |
| INSIDE SURFACE CONDITION | SMOOTH |
| MEASURING METHOD AND LENGTH | 22.000 INCHES NOMINAL WORKING |
| SPECIAL FEATURES | INNER TUBE MATERIAL IS BUNA-N RUBBER; FITTINGS ARE STEEL (AMS 5024 OR AMS 5050) WITH ALUMINUM (AMS 4112, 2024, T6) |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |
| SPECIFICATION/STANDARD DATA | 96906-MS28762 GOVERNMENT STANDARD |
| A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT; and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING. |
MIL-DTL-68
$0.00