Part Number: MIL-R-39035/7

(No reviews yet) Write a Review
CONDITION:
NS
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
BOURNS, INC.32997
CAE INC35181
SECTION QUANTITY1
BODY STYLERECTANGULAR
RELIABILITY INDICATORNOT ESTABLISHED
BODY LENGTH0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM
BODY WIDTH0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
BODY HEIGHT0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
SHAFT BEARING TYPEBEARING
ACTUATOR TYPEFLUSH DRIVE WITH SLOT-HOLE
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION7200.0 NOMINAL
MAXIMUM STARTING TORQUE5.00 INCH-OUNCES
MAXIMUM RUNNING TORQUE5.00 INCH-OUNCES
III FRAGILITY FACTORMODERATELY RUGGED
TERMINAL LOCATIONDUAL INLINE
MOUNTING METHODTERMINAL
FEATURES PROVIDEDHUMIDITY PROOF
ELECTRICAL RESISTANCE PER SECTION50.0 KILOHMS SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG7200.0 NOMINAL
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0 TO 100.0 SINGLE SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECLUTCH
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
TERMINAL TYPE AND QUANTITY4 TAB, SOLDER LUG
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.