Part Number: MIL-STD-130

(No reviews yet) Write a Review
CONDITION:
NS
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
A P M HEXSEAL CORPORATION97539
NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-280020
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER10001
L-3 COMMUNICATIONS ELECTRONIC SYSTEMS INC9691
GENERAL MOTORS CORP24617
DELCO ELECTRONICS CORP DELCO SYSTEMS OPNS99974
ANIXTER INC.0EER9
ALIGN AEROSPACE LLC56563
HONEYWELL INTERNATIONAL INC.70210
A P M HEXSEAL CORPORATION97539
TYCO ELECTRONICS CORPORATION779
A P M HEXSEAL CORPORATION97539
A P M HEXSEAL CORPORATION97539
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.750 INCHES MINIMUM
FASTENER LENGTH0.750 INCHES NOMINAL
HEAD STYLEPAN
HEAD DIAMETER0.220 INCHES NOMINAL
HEAD HEIGHT0.069 INCHES NOMINAL
INTERNAL DRIVE STYLESLOT
NOMINAL THREAD DIAMETER0.112 INCHES
FEATURES PROVIDEDO RING
THREAD QUANTITY PER INCH40
SCREW MATERIALSTEEL CORROSION RESISTING
SCREW SURFACE TREATMENTPASSIVATE
THREAD SERIES DESIGNATORUNC
An externally threaded fastener whose threaded portion is of one nominal diameter, No ( . 6 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 1 ( .19 in./5 mm). No. 1 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.