Part Number: MLS100-M04-02C

(No reviews yet) Write a Review
CONDITION:
NS
HUCK INTERNATIONAL, INC.0HDW7
HUCK INTERNATIONAL, INC.17446
HUCK MFG CO29666
HUCKF6167
HUCK MFG CO29666
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
FASTENER LENGTH0.260 INCHES MAXIMUM
HEAD STYLEFLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
SHANK DIAMETER0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM
SHANK STYLESELF-PLUGGING MECHANICALLY LOCKED STEM
HEAD MAJOR DIAMETER0.221 INCHES MINIMUM AND 0.229 INCHES MAXIMUM
EXPANSION DEVICESERRATED STEM-TYPE W
GRIP LENGTH0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
COUNTERSINK ANGLE98.5 DEGREES MINIMUM AND 101.5 DEGREES MAXIMUM
MATERIALIRON ALLOY 660 LOCKING RING OR NICKEL ALLOY 400 LOCKING RING OR NICKEL ALLOY R-405 LOCKING RING
MATERIALIRON ALLOY 660 STEM
MATERIALNICKEL ALLOY 400 SLEEVE OR NICKEL ALLOY R-405 SLEEVE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5737 ASSN STD 1ST MATERIAL RESPONSE LOCKING RING OR QQ-N-281 FED SPEC 2ND MATERIAL RESPONSE LOCKING RING OR QQ-N-281 FED SPEC 3RD MATERIAL RESPONSE LOCKING RING
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5737 ASSN STD SINGLE MATERIAL RESPONSE STEM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-281 FED SPEC ALL MATERIAL RESPONSES SLEEVE
SURFACE TREATMENTCADMIUM SLEEVE AND CHROMATE SLEEVE OR ALUMINUM ALLOY SLEEVE
SURFACE TREATMENTPASSIVATE LOCKING RING
SURFACE TREATMENTPASSIVATE STEM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STEM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FOR A286 CRES ONLY FED SPEC SINGLE TREATMENT RESPONSE LOCKING RING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE SLEEVE OR NAS 4006 ASSN STD 2ND TREATMENT RESPONSE SLEEVE
SPECIFICATION/STANDARD DATA80205-NAS1921 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.