Part Number: MS16208-141

(No reviews yet) Write a Review
CONDITION:
NS
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.500 INCHES MINIMUM
FASTENER LENGTH2.125 INCHES MINIMUM AND 2.375 INCHES MAXIMUM
HEAD STYLEHEXAGON
HEAD HEIGHT0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM
WIDTH BETWEEN FLATS0.906 INCHES MINIMUM AND 0.937 INCHES MAXIMUM
NOMINAL THREAD DIAMETER0.625 INCHES
GRIP LENGTH0.625 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEAD
THREAD QUANTITY PER INCH11
MINIMUM TENSILE STRENGTH75000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH30000 POUNDS PER SQUARE INCH
MATERIALSTEEL COMP 302 OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 310 OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNC
STYLE DESIGNATORJ163 SHOULDER
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of .19 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of . 15 inch ( . 38 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.