| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
| FIRST END STYLE | CHAMFERED |
| SECOND END STYLE | RADIUS |
| PIN OVERALL LENGTH | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM |
| PIN OVERALL DIAMETER | 0.1251 INCHES MINIMUM AND 0.1253 INCHES MAXIMUM |
| SECOND END CORNER RADIUS | 0.041 INCHES MAXIMUM |
| FIRST END TAPER LENGTH | 0.347 INCHES NOMINAL |
| FEATURES PROVIDED | CASEHARDENED |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| HARDNESS RATING | 47.0 ROCKWELL C MINIMUM OVERALL AND 58.0 ROCKWELL C MAXIMUM OVERALL |
| SHEAR STRENGTH | 3200 DOUBLE POUND |
| FIRST END TAPER ANGLE | 4.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM |
| SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER |
| SPECIAL FEATURES | RADIUS END MAY BE CHAMFERED 25.0 DEGREES |
| MATERIAL | STEEL OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A29 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYLE DESIGNATOR | K174 SLOTTED |
| A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (3 4 MM); for items whose length exceeds twelve inches (3 4 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED. |
MS16555-640
$0.00
MS16555-618
$0.00
MS16555-608
$0.00
MS16555-660
$0.00
MS16555-606
$0.00