| MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
| ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| NUT STYLE | HEXAGON |
| NUT HEIGHT | 0.965 INCHES MINIMUM AND 1.016 INCHES MAXIMUM |
| WIDTH ACROSS FLATS | 1.239 INCHES MINIMUM AND 1.252 INCHES MAXIMUM |
| TEMP RATING | 250.0 DEG FAHRENHEIT NOMINAL |
| THREAD SERIES | UNC |
| THREAD QUANTITY PER INCH | 9 |
| NOMINAL THREAD SIZE | 0.875 INCHES |
| COUNTERSINK ANGLE | 88.0 DEGREES NOMINAL NUT |
| BEARING SURFACE TYPE | CHAMFERED |
| BEARING SURFACE FINISH | 125.0 MICROINCHES |
| MATERIAL | PLASTIC POLYAMIDE LOCKING INSERT |
| MATERIAL | STEEL COMP 301 NUT OR STEEL COMP 302 NUT OR STEEL COMP 303 NUT OR STEEL COMP 303F NUT OR STEEL COMP 303S NUT OR STEEL COMP 304 NUT OR STEEL COMP 304L NUT OR STEEL COMP 305 NUT OR STEEL COMP 308 NUT OR STEEL COMP 309 NUT OR STEEL COMP 310 NUT OR STEEL COMP 310S NUT OR STEEL COMP 314 NUT OR STEEL COMP 316 NUT OR STEEL COMP 316L NUT OR STEEL COMP 317 NUT OR STEEL COMP 321 NUT OR STEEL COMP 323 NUT OR STEEL COMP 324 NUT OR STEEL COMP 347 NUT OR STEEL COMP 348 NUT OR STEEL COMP 385 NUT OR STEEL COMP 302B NUT OR STEEL COMP 384 NUT |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE LOCKING INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES NUT |
| SURFACE TREATMENT | PASSIVATE NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| A nut having a flat bottom and 6 sides. An integral feature is incorporated for locking on the threads of a mating member. Excludes NUT (1), SELF-LOCKING, CAP. |
MS17830-6C
$0.00
MS17830-9C
$0.00
MS17830-5F
$0.00
MS17830-4C
$0.00