BOLT,
| MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.788 INCHES NOMINAL |
| FASTENER LENGTH | 3.163 INCHES NOMINAL |
| HEAD STYLE | DOUBLE HEXAGON EXTENDED WASHER |
| HEAD HEIGHT | 0.504 INCHES NOMINAL |
| WIDTH BETWEEN FLATS | 0.563 INCHES NOMINAL |
| EXTENDED WASHER DIAMETER | 0.818 INCHES MINIMUM AND 0.828 INCHES MAXIMUM |
| EXTENDED WASHER THICKNESS | 0.123 INCHES NOMINAL |
| GRIP DIAMETER | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
| NOMINAL THREAD DIAMETER | 0.500 INCHES |
| GRIP LENGTH | 2.365 INCHES MINIMUM AND 2.385 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 20 |
| MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES GRIP |
| MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 6150 OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.788 INCHES NOMINAL |
| FASTENER LENGTH | 3.163 INCHES NOMINAL |
| HEAD STYLE | DOUBLE HEXAGON EXTENDED WASHER |
| HEAD HEIGHT | 0.504 INCHES NOMINAL |
| WIDTH BETWEEN FLATS | 0.563 INCHES NOMINAL |
| EXTENDED WASHER DIAMETER | 0.818 INCHES MINIMUM AND 0.828 INCHES MAXIMUM |
| EXTENDED WASHER THICKNESS | 0.123 INCHES NOMINAL |
| GRIP DIAMETER | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
| NOMINAL THREAD DIAMETER | 0.500 INCHES |
| GRIP LENGTH | 2.365 INCHES MINIMUM AND 2.385 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 20 |
| MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES GRIP |
| MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 6150 OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THREAD SERIES DESIGNATOR | UNJF |
