Part Number: MS21299C9K

Alternate Part Number:
5310-01-477-5010

(No reviews yet) Write a Review
CONDITION:
NS
WASHER, COUNTERSUNK,,
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
HOLE DIAMETER0.564 INCHES MINIMUM AND 0.568 INCHES MAXIMUM
OUTSIDE DIAMETER1.059 INCHES MINIMUM AND 1.069 INCHES MAXIMUM
RECESS DIAMETER0.684 INCHES MINIMUM AND 0.694 INCHES MAXIMUM
MATERIAL THICKNESS0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM
RECESS ANGLE90.0 DEGREES NOMINAL
SURFACE FINISH125.0 MICROINCHES ALL SURFACES
MATERIALSTEEL COMP 630 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5604,17-4PH,COND H 1025 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORRECESSED
SPECIFICATION/STANDARD DATA80205-NAS-21299 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
END ITEM IDENTIFICATIONE/I DIRECT VENDOR DELIVERY (DVD), ATEC AT422-T, NSN: 3810-01-448-2619, CAGE 12361, PART NUMBER 1-140-0-00513, TM5-3810-307-24P, CONTRACT DAAE07-97-D-X001
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.