HOSE ASSEMBLY,NONME,HOSE ASSEMBLY,NONMET,HOSE ASSEMBLY,NONMET,HOSE ASSEMBLY,NONME,
| PARKER-HANNIFIN CORPORATION | 50599 |
| MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| INSIDE DIAMETER | 0.625 INCHES NOMINAL |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| OUTSIDE DIAMETER | 1.078 INCHES NOMINAL |
| MINIMUM INSIDE BENDING RADIUS | 6.500 INCHES |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| THREAD QUANTITY PER INCH | 12 1ST END |
| BURST TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT |
| VACUUM IN TORR | 50.8 |
| INSIDE SURFACE CONDITION | SMOOTH |
| MEASURING METHOD AND LENGTH | 108.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| THREAD SERIES DESIGNATOR | UNJ 1ST END |
| SPECIFICATION/STANDARD DATA | 96906-MS28741 GOVERNMENT STANDARD |
| STYLE DESIGNATOR | A4 CURVED ARCH |
| A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT; and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING. |
