Part Number: MS35214-9

(No reviews yet) Write a Review
CONDITION:
NS
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.714 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
FASTENER LENGTH0.750 INCHES NOMINAL
HEAD STYLEPAN
HEAD DIAMETER0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM
HEAD HEIGHT0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER0.086 INCHES
THREAD QUANTITY PER INCH56
MINIMUM TENSILE STRENGTH57000 POUNDS PER SQUARE INCH
SCREW MATERIALCOPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
THREAD SERIES DESIGNATORUNC
NONDEFINITIVE SPEC/STD DATA3 TYPE AND 2C STYLE
An externally threaded fastener whose threaded portion is of one nominal diameter, No ( . 6 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 1 ( .19 in./5 mm). No. 1 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.