Part Number: MS35265-16

(No reviews yet) Write a Review
CONDITION:
NS
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.388 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
FASTENER LENGTH0.438 INCHES NOMINAL
HEAD STYLEFILLISTER
HEAD DIAMETER0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM
HOLE DIAMETER0.037 INCHES NOMINAL
INTERNAL DRIVE STYLESLOT
NOMINAL THREAD DIAMETER0.112 INCHES
HOLE QUANTITY1
THREAD QUANTITY PER INCH40
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH
SCREW MATERIALSTEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
HEAD HOLE CONFIGURATION STYLEROUND
THREAD SERIES DESIGNATORUNC
An externally threaded fastener whose threaded portion is of one nominal diameter, No ( . 6 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 1 ( .19 in./5 mm). No. 1 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.